Skip to content

Digital IC Trainer

SKU: 1004 Category:

SALIENT FEATURES :

Elaborately detailed User?s Manual unfolds digital fundamentals through well thought out experiments with theoretical reviews self tested questions and exercises. Built – in power supply provides all voltages necessary for experimentation. Patch panel contains commonly used SSI and MSI devices.

TYPICAL EXPERIMENTS:

  • Verification of the laws / theorems of Boolean Algebra. Study of gates and verification of their truth tables.
  • Construction of their combinational circuits.
  • Study of TTL terms and definations. Verification of important TTL circuit parameters.
  • Study of various flip – flops and their truth tables. Building flip – flops using gates.
  • Study of monoshot truth table and timing.
  • Study of shift registers operations, implementing registers using flip – flops, serial to parallel conversion.
  • Verification of the operation of decade counters and synchronous up / down counters.
  • Study of arithmetic circuits and comparators.
  • Implementing adders using gates.
  • Understanding 7 – segment display and decoder / driver.

TECHNICAL SPECIFICATIONS:

POWER SUPPLY:

  • Output voltage available on the front panel from the built – in regulated power supply is :
  • Output Voltage & Current : 5V / 1A, short circuit protected.
  • Load Regulation : 1 % ( No load to full load ).
  • Line Regulation : 1 % ( for + 10 % variation in line voltage ).
  • Ripple : < 12 mV.

GENERAL :

Components on the patch panel include the following :

  • Quad 2 input NAND gate ( 7400 ).
  • Quad 2 input NOR gate ( 7402 ).
  • Dual 2 input AND gate ( 7408 ).
  • Dual 4 input NOR gate with enable ( 7425 ).
  • Quad inverters ( 7404 ).
  • Dual 2 input OR gate ( 7432 ).
  • Dual 4 input NAND gate ( 7440 ).
  • 3 to 8 Line Decoder / Demultiplexer ( 74138 ).
  • Dual EX – OR gate ( 7486 ).
  • Quad J – K flip – flop with preset and clear ( 7476 ).
  • One shot ( Mono – shot ) ( 74121 ).
  • 4 – bit Parallel Access shift register ( 7495 ).
  • Synchronous UP / DN counter with dual clock ( 74193 ).
  • BCD / 7 – segment decoder / driver ( 7447 ).
  • 4 – bit Binary Adder with fast carry ( 7483 ).
  • 4 – bit magnitude comparator ( 7485 ).
  • 1 to 8 Data Selector / Multiplexer ( 74151 ).
  • Decade Divide by 12 and Binary counter ( 7490 ).
  • 4 – bit Bi – directional Universal shift register ( 74194 ).
  • One 7 segment LED display, 10 logic input switches with LED indication, 4 pulsar switches, 10
  • logic output indicators.
  • Breadboard Terminal strip with 640 tie points.
  • 4 Connecting Strips.
  • Variable clock generator.
  • Fixed Clock ( 0.1 Hz, 1 Hz, 100 Hz & 1 KHz ).
  • 20 Pin ZIF Socket.

STANDARD ACCESSORIES :

  • Detailed Instruction Manual.
  • Set of Patch Cords.

Reviews

There are no reviews yet.

Be the first to review “Digital IC Trainer”

Your email address will not be published. Required fields are marked *