Level Control Setup 4021B

Categories: Control Engineering

4021B                       Adtron’s Model 4021B Level Control Setup comprises of a Measuring tank fitted with Level transmitter to measure the water level. The flow of water is controlled by a control valve actuated by an I to P converter. Rotameter is provided to measure the flow rate. The system is mounted on a table top model with all necessary pipings. The water inlet and outlet is provided through a manual control valve. Water at approx. 100 LPH has to be supplied to the system externally. The electronic panel comprises of ADC/DAC card with RS – 232 interface. Software is provided for experimentation, PID Control settings ( P, PI, PD and PID mode ) Data storing, Online data acquisition, Off line analysis, Printing of data’s can be done easily.   voltages.


Level Sensor          :      Differential Pressure Transmitter type output 4-20mA

Measuring Tank :           Capacity 5 Liters, with graduation.

Rotameter               :           10 – 100 LPH

Control Value       :           Globe 2 Way ½”, with diaphragm type actuator, Total stem travel 18mm, Air operated, 3 to 15 PSI pressure.

Air Regulator       :           ¼” BSP, for 0 to 15 PSI pressure

I/P Converter      :           4 to 20 mA input output 3 to 15 PSI

ADC/DAC Card   :           12 bit resolution, 8 input 1output with RS 232 Serial Interface to PC

PID Controller   :           Software based on LABVIEW to control the Process Controller and Data Acquisition, Trend plot, Offline, Analysis and Printing.