Mobile Phone Trainer 7526

Categories: Advance Communication ( series 75XX )

SPECIFICATIONS

►          Cellular System            :   EGSM / GSM 900

 ►          Rx frequency band    :   EGSM 925, 960MHz, GSM 900, 935, 960Mhz.

 ►          Tx Frequency band   :   EGSM 880, 890MHz  GSM900, 890, 915MHz.

 ►          Output Power               :   +5, +33dBm / 3.2mw—2W.

 ►          Channel spacing          :   200Khz

 ►          Antenna                          :   Loop type 50W

 ►          Display                            :   84x48pixels.

 ►          On board sections      :    Antenna keypad SIM charging circuit  clock.

 ►          User interface such as buzzer, vibrator and LED’s .

 ►          No. of test points        :    41

 ►          No. of switched fault :    25.

 ►          Features that can be set : Screen savers ring tones logos SMS etc.

 ►          Accessories : Battery mains cord. Manual hands free kit CD containing Mobile phone working presentation.

 ►          Power Supply : 220V + 10%, 50Hz/60Hz on request.

 ►          Power consumption : 3.6VA (Approx.)

 ►          Fuse : 1.5Amps.

FEATURES

 ►          GSM Capacity : GSM 900/1800EGSM, GSM data services Asynchronous transparent & non transparent.

 ►          Modes : 14.4Kbits/s

 ►          SIM interface : 3V.

RF Characteristics :

Receiver :

 ►          EGSM sensitivity : < -104dBm
 ►          DCS sensitivity : < -102dBm
 ►          Selectivity @ 200Khz : >+9dBc
 ►          Selectivity @ 400Khz : >+41dBc.
 ►          Dynamic range : 63dB
 ►          Intermodulation : >-43dBm
 ►          C-channel rejection : > 9dBc

Transmitter :

►          Maximum output power    :    33dBm +2dB (EGSM).
►          Maximum output power    :    30dBm +2dB (DCS)
►          Maximum output power    :    5dBm +5dB (EGSM)
►          Maximum output power    :    0dBm +5dB (DCS 1800)
                                                                          Noise in 925-935MHz <-67dBm
                                                                          Noise in 935-960MHz <-79dBm
                                                                          Noise in 1805 –1880 Mhz <- 71dBm]
                                                                          Phase error at peak power <5deg.
                                                                          RMS.
►          Frequency error                    :    0.1ppm max
►          Power Supply                          :    9V
►          Current consummation      :    Max 500mA