Oscillators & Wave Shaping Circuits

Boot Strap Integrator 5520

SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Supply required 230V, 50Hz AC.

*          Construction and study of a boot – strap integrator.

*          Study the effect of various parameters on the output waveforms.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

 

 

Miller Sweep Integrator 5519

5519SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Study the construction and working of phase shift oscillator.

*          Observation and determination of the frequency of an R – C phase shift oscillator.

*          Comparison of the phase of output across each element of phase shift network in the oscillator.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

Miller Integrator 5518

SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Supply required 230V, 50Hz AC.

*          Construction and study of a Miller Integrator, using semiconductor devices ( active components ).

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

Differentiating and Integrating Circuits Model – 5517

5517SALIENT FEATURES :

 

*         Completely self – contained stand – alone unit.

 

*         Demonstrates the principle, working and comparison of various Differentiating & Integrating Using RC component.

 

*         Various experiments possible are :

 

*         An Integrating circuit

*          A Differentiating circuit

 

*         Built – in bank of resistors & capacitors.

 

*         Multi – coloured test points are provided at various stages in the circuit to observe the waveforms and voltages.

 

*         Set of patch cords.

 

*         Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

 

*         Strongly supported by a comprehensive instruction manual complete with theory and operating details.

 

*         Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC                Mains.

Clipping and Clamping Circuits 5516

5516_miniSALIENT FEATURES :

*          Completely self – contained stand – alone unit.

*          Demonstrates the principle, working and comparison of various clipping and clamping using diodes.

 *          Various experiments possible are :

                     *          Positive Clipping.

                     *          Negative Clipping.

                     *          Biased Positive Clipping.

                     *          Biased Negative Clipping.

                     *          Combination Clipping.

                     *          Positive Clamping.

                     *          Negative Clamping.

*          Built – in bank of resistors, capacitors and diodes.

*          Multi – coloured test points are provided at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

Staircase Generator 5515

SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Supply required 230V, 50Hz AC.

*          Construction and study of a staircase generator.

*          Built – in input waveform generator.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

 

 

Sawtooth Generator 5514

SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Supply required 230V, 50Hz AC.

*          Construction and study of a sawtooth generator using transistors and Op – amps.

*          Study and comparison of linearity of the ramp wave generated by charging a capacitor from a built – in constant current source.

*          Built – in input waveform generator.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

 

 

Schmitt Trigger 5513

5513SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Construction and study of a Transistorised Schmitt trigger.

*          Study the effect of change in amplitude of input sine wave on the rectangular wave output ( effect on amplitude, width, etc ).

*          Observe the hysteresis loop.

*          To observe the UTP and LTP.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

Bistable Multivibrator 5512

5512SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*          Construction and study of a Bistable ( flip – flop ) transistorised multivibrator.

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.

Monostable Multivibrator 5511

5511SALIENT FEATURES :

*          Dedicated trainer board for each wave shaping circuit.

*          Completely self – contained stand – alone unit.

*         Construction and study of a monostable ( single shot ) transistorised multivibrator.

*          Study of the change in time period with the help of a built – in potentiometer ( for biasing ).

*          Test points at various stages in the circuit to observe the waveforms and voltages.

*          Set of patch cords.

*          Housed in an elegant metal cabinet with a well spread intelligently designed circuit layout on the front panel.

*          Strongly supported by a comprehensive instruction manual complete with theory and operating details.

*          Built – in DC regulated power supply with short circuit protection and LED indication for supply “ON” to works on 230V AC Mains.