Microprorocessor Training Kit

8086 Microprocessor Training Trainer with LCD & 101 PC Keyboard

 

SALIENT FEATURES :

 

4         8086 / 8088 CPU operating at 2.5 / 5MHz.

 

4         8086 Processor can be replaced by 8088 Processor.

 

4         On – board sockets provided to facilitate the use of 8087 Co – processor and 8089 I/O Processor.

 

4         16K bytes of RAM with Battery Backup expandable upto 256KB.

 

4         16K bytes of powerful monitor EPROM.

 

4         48 I/O lines through 2 nos. of 8255 brought at 26 Pins FRC Connector.

 

4         24 I/O lines through 1 no. of 8255 brought at 25 Pins D-type Connector for Printer Interface.

 

4         16 bit Timer / Counter through 8253.

 

4         RS – 232C interface using 8251.

 

4         On – board Interrupt controller using 8259.

 

4         20 x 2 Backlite LCD Display with 101 ASCII Keyboard.

 

4         Powerful Commands like Examine / Edit Memory, Examine / Edit Resistor, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode.

 

4         Facility for downloading / uploading files from / to PC.

 

4         All address, data and control lines are available on 50 pin FRC Connector.

 

4         In – built power supply of + 5V / 1A, + 12V / 150mA.

 

4         User’s manual with sample programs.

 

 

SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT

DEVELOPMENTS WITHOUT ANY PRIOR NOTICE

8085 MICROPROCESSOR TRAINING KIT ( LCD ) ( MODEL M85-04 )

 

SALIENT FEATURES :

 

→       Based on 8085 CPU operating at 6.144 MHz.

 

→    8K bytes of EPROM Monitor.

 

→       8K bytes of RAM with Battery Backup using NICD Battery.

 

→       On-board one memory expansion upto 64KB.

 

→      Three Channel Timer/Counter using 8253 brought at 10 Pins FRC Connector.

 

→       24 I/O lines provided through 8255 brought at 26 Pins FRC Connector.

 

→       22 I/O lines provided through 8155 brought at 26 Pins FRC Connector.

 

→       RS – 232C interface through SID/SOD lines.

 

→       Two mode of commands:

 

→        ASCII Key pad Mode.

→        Serial Mode.

 

→        20 x 2 Backlite LCD Display with 101 ASCII Keyboard.

 

→      Powerful Commands like Examine / Edit Memory, Examine / Edit Resistor, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.

 

→        Single Line Assembler / Disassembler.

 

→      Facility for Downloading / Uploading files from / to PC.

 

→      All address, data and control lines are available on 50 pin FRC Connector.

 

→      In – built power supply of + 5V / 1A, + 12V / 150mA.

 

→      User’s manual with sample programs.

 

 

 

SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT

DEVELOPMENTS WITHOUT ANY PRIOR NOTICE